About FIC

  PRODUCTS

  SUPPORT

  CONTACTS

  SEARCH

 
 

   printable version

PO-6000 BIOS Update Page

Before Updating

If you are considering updating your BIOS, we strongly suggest that you first contact your dealer or system assembler. This On-line BIOS Guide contains only general information about the standard product, and as such, the information and files provided here may not, in some cases, work with your hardware.

You should be aware that flashing a BIOS is not guaranteed to be successful. If your system is already running well, then even if there is a new version of the BIOS available, it may not be the best option to flash the new one. Your system may experience serious adverse side effects or even lower performance.

If you decide to flash a new BIOS make sure that you have first made a backup copy of your present BIOS onto a bootable floppy. This way you will most likely be able flash back to your old setup if problems arise.

FILE NAME PCB DESCRIPTION
405f05c.zip 1.2 AMI BIOS ver. 405F05C 09/11/96
    1. Fixed Pardise Pipeline VGA BIOS bootup hanging.
2. Fixed the 3F8H conficting message before OS loading while using supra express PnP modem.
3. Use Phlash.zip for flashing!
4. Use Platform.zip for flashing!
405f03b.zip 1.2 AMI BIOS ver. 405F03B 08/05/96
    1. Fixed Pardise Pipeline VGA BIOS bootup hangup.
2. Fixed the 3F8H conflict message before OS loading while using Supra Express PnP modem.
3. Use Phlash.zip for flashing!
4. Use Platform.zip for flashing!

NOTE: For Intel Pentium Pro CPU version B0.

405f30c.zip 1.2 AMI BIOS ver. 405F03C 3/16/96
    1. Fixed Misrosoft serial mouse mode unable to function in the Windows for Workgroup or Windows 95.
2. Fixed the problem of the system cannot boot from bootable CD-ROM while using Toshiba ATAPI CD-ROM.
3. Fixed the problem of ATAPI CD-ROM recognition under Windows if primary master and BIOS HDD type set to auto/CD. Working in HDD type set to none.
4. Added clear password jumper function.
5. Added reporting of DRAM timing : OMC Register
AC to AF --> 3516 RAS Pre-charge time --> 5T. PAS Plus width --> 6T. RAS to CAS --> 3T. Write Cycle CAS Plus width->3T.
6. Added new setup faeture " InfaRed Duplex Type Full/Half Dupflex" function. Default set to duplex. Fixed for Windows.
7. Use Phlash.zip for flashing!
8. Use Platform.zip for flashing!

NOTE: For Intel pentium Pro CPU version.

Disclaimer:
Intel, VIA, Adobe, Microsoft and other registered trademarks are property of their owners.
The files and links on this page are provided by FIC as a service to its customers and serve for informational purposes only. The content is provided "as is" without any express or implied warranty.
Copyright (c) 1997 First International Computer, Inc. All rights reserved.