Note : This is chipset Patch driver. It informs the operating system how to properly configure the chipset for specific functionality properly reconized by the operating system.
VIA ProSavageDDR Video Driver (KM266) ver. 4.13/6.13
Note : This is Video Driver. It properly recognized by on-board graphic controller by the operating system which can improve graphic quality and performance.
Note : This is Patch file for USB. It informs the operating system how to properly configure the chipset for specific functionality properly reconized by the operating system.
For all VIA Chipset based FIC 1stMainbaords (eg, AZ11 series, AD11, SD11, and VA-503+ which are VIA
North/South bridge based motherboards), We recommend that you install related drivers after you have installed
Windows 9x, ME,NT,2000. For example, if you re-install the AGP driver for your VGA card, re-install 4-in-1's
AGP driver part as needed.
VIA's 4-in-1 / 3-in-1 is for improved performance, fixing issues and minimizing any
incompatibilities. 4-in-1 contains an AGP driver, IDE Busmaster, IRQ Routing and INF drivers
for Windows. 3-in-1 is the same as 4-in-1 except for the missing AGP driver.
This page includes the latest VIA Chipset drivers which are approved by FIC. All necessary drivers are
included in the CD-Pro CD which comes with each 1stMainboard purchased. Users can also
download the latest CD-Pro from HERE. For the introduction to CD-Pro please click HERE
Please download and install the correct driver as below:
VIA Chipset Drivers
VIA Patch drivers for all VIA chipset based 1stMainboards
All boards with the VIA 586B south bridge need the VIA USB Filter Driver to activate the USB controller to work with Windows. FIC products PA-2013 & VA-503+.. need to apply this USB filter for Windows. (you must enable the USB function in BIOS beforehand )
After downloading the correct driver to your HD , please double click the file to install
If video/audio/lan.. functions are embedded on the motherboard, you also need to install the correct driver. To download the necessary driver ,please check below table or go to the motherboard support page and select the correct 1stmainboard model name: all necessary drivers are listed.Alternatively you can also download the latest CD-Pro folder directly from FIC 's FTP site.
Universal Serial Bus (USB) devices that are plugged in to a computer running Microsoft Windows 98 Second Edition may not work if the following hardware components are installed on the computer: